Month: January 2023

The plum coupling compensates the performance by squeezing transmission

plum coupling

The quincunx coupling is based on the straight claw type, but the difference is that its design can be suitable for the application of servo system, which is often used to connect servo motor, stepping motor and ball…

Read More »

Curved-tooth Gear Coupling adapts to various deviations and torques

The Curved-tooth Gear Coupling uses parallel or spiral grooving system to adapt to various deviations and accurately transmit torque, and usually has good performance. In many practical applications of stepping and servo systems, the integrated design makes the…

Read More »

Flexible Coupling reduces vibration to achieve torsional rigidity

Flexible Couplings

The Flexible Coupling can offset part of the circumferential stress with the stress produced, so as to reduce the stress error. Before fitting, the inner diameter of the outer cylinder of the double-layer combined jacket is slightly smaller…

Read More »

Deviation of Curved-tooth Gear Couplings after high-speed operation

Curved-tooth Gear Couplings

During the installation process, the overheated Curved-tooth Gear Couplings needs to be hammered to make it tightly penetrate the shaft after being lifted and installed on the shaft. In this process, the Curved-tooth Gear Couplings is not easy…

Read More »

The Universal Shaft is in normal use without any abnormality

Universal Shaft

When rotating, lift the implement as long as it is off the ground, and the lifting angle shall not exceed 15 degrees. When the lifting height exceeds the standard, pay attention to cutting off the power, otherwise it…

Read More »

Determinants of rotating speed when using the Flexible Jaw Couplings

Flexible Jaw Couplings

It brings a lot of convenience to the work in use, and the speed of the Flexible Jaw Couplings has a decisive factor in use. The speed range of the plum coupling is also determined by different materials,…

Read More »

Bending stress caused by axial installation error of Steel Laminae Coupling

Steel Laminae Coupling

The membrane segment between two adjacent bolt holes in the coupling can be equivalent to a cantilever beam, and the calculation formula of the internal stress of the diaphragm when the connecting-rod diaphragm coupling is subjected to torque,…

Read More »

Diaphragm Coupling avoids magnifying measurement error

Steel Laminae Coupling

During the assembly process of metal flexible diaphragm coupling, appropriate measurement datum shall be selected. The diaphragm coupling shall avoid magnifying the measurement error. The measurement datum of the motor half coupling shall be the combination of the…

Read More »

Load form and natural frequency of Flexible Couplings

Flexible Couplings

The elastic deformation of the Flexible Couplings compensates the relative displacement of the two connected shafts, which is a metal elastic element flexible coupling with good performance; In the process of mechanical transmission, the load transmitted by the…

Read More »